EverFocus EFD300 User Manual
Page 6
5
INSTALLATION
This section covers simple steps and detail installation. Please follow instruction for preventing
any unnecessary damage.
Simple Steps:
1. Cut a circle on the ceiling and mount the camera
2. Adjust lens, camera position
3. Adjust camera setting on Dip Switch
Detail Steps:
1. Cut a circle on the ceiling and mount the camera
a. Make a hole on the ceiling (110mm/4.33”φ) against the housing’s shape by using Drill
Template in the package.
b. Mount camera into the hole that you just made.
c. Connect Power and Video - Please connect 12VDC or 24VAC. Wrong power connection will
cause power failure and shortage.
d. Screw the bolts on both sides of housing by using a screwdriver until they are perfectly fit to
the ceiling.
e. Place the cover back and clip it on the camera.