Florabest FTP 400 C2 - Manual (Page 5)

5
GB
Functional description
The pump is fitted with a float switch,
which automatically switches the equip-
ment on or off.
In case of overload, the pump is switched
off by the integrated thermal protection
switch. After cooling, the motor restarts au-
tomatically.
In addition, the pump also has a backflow
stop that prevents water from flowing back,
for example during an interruption in the
power supply.
Technical Data
Submersible water pump .............FTP 400 C2
Mains connection ............ 230 V~, 50 Hz
Power consumption .....................400 W
Max. discharge rate (Qmax) ... 10000 l/h
Max. discharge head (Hmax) ............7 m
Max. depth of immersion ..................7 m
Max. water temperature (Tmax) .......35°C
Hose connection ............ ½“, ¾“, 1“, 1 ½“
(13 mm,19 mm, 25 mm, 38 mm)
Tap connection with
interior thread ................G 1 ½“ (44,9 mm)
Max. foreign body size ...............ø 5 mm
Mains cable ..................................10 m
Weight (incl. accessories) ...approx. 4.0 kg
Safety class ..........................................I
Degree of protection ........................ IPX8
Technical and optical changes can be
carried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the basis
of the instruction manual, cannot thus be
considered as valid.
for which the equipment is intended or by
incorrect operation.
General Description
The illustration of the principal
functioning parts can be found
on the front foldout page.
Scope of Delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Submersible water pump (pump)
- Angle adapter + adapter with hose
connection
- 8 m nylon rope
- Instructional manual
Overview
1 Carrying handle
2 Mains cable
3 Pump casing
4 Pump base
5 Pump output
6 Float switch
7 Float switch cable
8 Float switch grid
9 Adapter with hose connection
10 backflow stop with seal
(not visible)
11 Angle adapter
12 8 m nylon rope
4a 3 screws, pump base
13 Sealing ring
14 Notch on base