LG 55EG960V User Manual
Page 27
27
ASSEMBLING AND PREPARING
ENGLISH
ENGLISH
3
M4 x L14
8 EA
4
Stand cover
y Insert the protruding parts of the Stand cover into
the holes.
CAUTION
5
Cover holder
Stand
cover
y Insert the Cover holder of the Stand cover into the
holes until it clicks. Press the Stand cover gently so
that the non-woven fabric inside is attached tightly.
CAUTION
y Remove the stand before installing the TV on a
wall mount by performing the stand attachment in
reverse.
NOTE
y When attaching the stand to the TV set, place the
screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
y Make sure that the screws are inserted correctly
and fastened securely. (If they are not fastened
securely enough, the TV may tilt forward after being
installed.)
Do not use too much force and over tighten the
screws; otherwise screw may be damaged and not
tighten correctly.
CAUTION