Melinera Z30253-BS - Manual (Page 7)

7 GB
must be supervised in order to ensure that they do not play with
the device.
Avoid the danger of
death from electric shock!

Before use, ensure that the mains voltage available is the same as the
required operating voltage for the device (230 V ∼).
 Before connecting the device to the mains you should always check
the LED curtain lights
1 and the mains lead for any damage.
 Never use the LED curtain lights 1 if you discover any kind of
damage.

If the cable is damaged, the product must be taken out of use and
disposed of in the proper way.

This article does not contain any parts which can be serviced by
the user. The bulbs cannot be replaced.
 Only use the LED curtain lights 1 with the supplied power pack for
the type (Model No. JL-210); all warranty claims will otherwise expire.
 Never open any of the electrical parts or insert any kind of object
into them.

Protect the mains cable from sharp edges, mechanical loads and
hot surfaces.

Do not install with sharp fasteners or nails.
 Always unplug the power pack from the socket before installation,
dismantling or cleaning.

Never touch the LED curtain lights 1 plug or the LED curtain
lights 1 itself with wet hands.
CAUTION! RISK OF OVERHEATING! Do not operate the
LED curtain lights 1 inside the packaging.
 The LED curtain lights 1 must not be electrically connected to
another set of lights.
74425_mel_LED_Lichtervorhang_content_LB4.indd 7 25.05.12 12:40