Wall cupboard, Introduction, Intended use – Miomare Z30031 User Manual

Page 7: Description of parts, Includes, Technical specifications, Safety information, Assembly

Advertising
background image

9

GB/MT

Wall cupboard

Q

Introduction

Please familiarise yourself with the product prior to assembly. Care-

fully read the following assembly instructions and safety tips. Only
use the unit as described and for the specified applications. Store

these instructions in a safe place. If passing this product on to a third party
also include all documents.

Q

Intended use

This product is intended for the storage of small and light objects in dry, private
indoor areas. Any use other than the aforementioned or any product modification
is prohibited and can lead to injuries and / or product damage. The manufacturer
is not liable for any damages caused by any use other than its intended purpose.
This product is not intended for commercial use.

Q

Description of parts

1

Side 1

2

Side 2

3

Back

4

Door

5

Cross brace (for wall mounting)

6

Bottom

7

Shelf

8

Cover panel

9

Handle

10

Phillips screw (approx. ø 4 x 16 mm)

11

Eccentric connector

12

Screw with dowel

13

Wooden dowel

14

Phillips screw (approx. ø 3 x 10 mm)

15

Phillips screw (approx. ø 3 x 14 mm)

16

Phillips screw (approx. ø 4 x 25 mm)

17

Phillips screw (approx. ø 3 x 12 mm)

18

Magnetic catch

19

Metal dowel

20

Screw (approx. ø 4 x 49 mm) (for wall mounting)

21

Dowel

22

Door hinge 1

23

Door hinge 2

24

Plastic cap

Q

Includes

Immediately after unpacking please check the package contents for complete-
ness and if all parts and the product are in good condition. Do not assemble
the product if the package contents are incomplete.

1 Side 1
1 Side 2
1 Back
1 Door
1 Cross brace (for wall mounting)
1 Bottom
1 Shelf
1 Cover panel
1 Handle
2 Phillips screws (approx. ø 4 x 16 mm)
8 Eccentric connectors
8 Screws with dowel
4 Wooden dowels
14 Phillips screws (approx. ø 3 x 10 mm)
2 Phillips screws (approx. ø 3 x 14 mm)

2 Phillips screws (approx. ø 4 x 25 mm)
4 Phillips screws (approx. ø 3 x 12 mm)
1 Magnetic catch
5 Metal dowels
2 Screws (approx. ø 4 x 49 mm) (for wall mounting)
2 Dowels
1 Door hinge 1
1 Door hinge 2
8 Plastic caps
1 Assembly instructions

Q

technical specifications

Dimensions: approx. 35 x 72 x 18 cm (W x H x D)
Material:

Bamboo and MDF

Max. load: 2 kg per shelf

Safety information

PLEASE READ THE ASSEMBLY INSTRUCTIONS BEFORE USE! PLEASE
KEEP THE ASSEMBLY INSTRUCTIONS IN A SAFE PLACE!

J

WArnInG!

rISK OF LIFe AnD AccIDentS In

InFAntS AnD cHILDren! Never leave children unattended
with the packaging material. Risk of suffocation. Keep children

away from the product.

m cAUtIOn! rISK OF InJUrY! Keep children away from the work area

when the product is being assembled. The scope of delivery contains some
screws and other small parts. They could pose a lethal hazard if they are
swallowed or inhaled.

m cAUtIOn! rISK OF InJUrY! Ensure all parts are undamaged and

correctly assembled. Incorrect assembly poses the risk of injury. Damaged
parts may affect safety and function.

m cAUtIOn! Do not leave children without supervision! The product is not

a climbing frame or toy! Make sure that nobody stands or pulls themselves
up on the product; this applies particularly to children. The product may
fall over. This can result in injury and / or damage to property.

J

cAUtIOn! FIre HAzArD! Do not place the product
anywhere near an open fire.

J

Keep the product away from water and moisture. Damage to property
may otherwise occur.

J

Make sure that the product is only assembled by competent persons.

J

Make sure that all connections are fitted together securely and check all
joints for stability.

J

2 kg

Make sure that only a maximum of 2 kg is loaded onto the
shelf. Otherwise injuries and / or damage to property may
result.

J

Attach the product to the wall.

note: Two screws

20

and two dowels

21

are included in delivery for

wall mounting purposes.

c cAUtIOn! DAnGer OF eLectrIc SHOcK! Before starting to drill,

make sure that there are no cables in the place where you wish to drill.

m cAUtIOn! WAter DAMAGe! Before starting to drill, make sure there

are no pipes in the place where you wish to drill.

J

Do not lift the cupboard up and do not carry it when it is full. Injuries may
result and the product could be damaged.

J

cAUtIOn! rISK OF InJUrY! Bamboo is a natural product. Despite
careful treatment of the surface and assessment, the possibility of splinters
cannot be ruled out.

J

Do not expose the product to direct sunlight. Otherwise the product may fade.

Q

Assembly

note: Assemble the product on a scratch-resistant floor that is sufficiently large
for the purpose. You may have to cover the floor in order to avoid making any
scratches.

52261_Content_LB5new.indd 9

29.03.10 11:42

Advertising