Edimax Technology ES-5224R+ - Manual (Page 21)

20
5.2.3.2 Create a VLAN Group
Create a VLAN group and configure tagged/untagged member
ports to it.
Create Port-Based VLAN
1. VLAN Name: Type a name for the new VLAN (ex: V1).
2. Grp ID: In port-based VLAN mode, this item means VLAN
group ID. The group ID range is 1 ~ 26.
3. Member: Press Space key to choose VLAN members.
There are two types to selected in port-based VLAN mode:
a. NO: This port is NOT member of this VLAN group.
b. Member: This port is the member of this VLAN group.
NOTE: If the trunk group exists, you can see it (ex: TRK1,
TRK2…) after port 26, and you can configure it as the member
of the VLAN group or not.