Eagle Electronics FISHSTRIKE 1000C - Manual (Page 191)

183
Calculating message (left) and list of the nearest waypoints (right).
4 . To see location information on the closest waypoint, press ENT and
the Waypoint Information screen appears. (If you wanted, you could
select another waypoint from the list with the
↑ or ↓ keys.)
A. To navigate to the waypoint, press ENT. ( The Go To Waypoint
command is already highlighted.) The unit will show navigation
information to the waypoint.
B. To find the waypoint, press ↓ to F
IND
O
N
M
AP
| ENT. The Map Page
appears with the cursor highlighting the found waypoint.
Waypoint Information screens with the Go To Waypoint command
selected (left) and the Find on Map command selected (right).
To clear these menus and return to the previous page, press EXIT
repeatedly.
5. If you're looking by name, there are two options: A . You can spell out
the name in the top selection box. Press ↑ or ↓ to change the first letter,
then press
→ to move the cursor to the next letter and repeat until the
name is correct , then press ENT | ENT. B. Or you can jump down to the
lower selection list by pressing ENT , then press ↓ or ↑ to select a
waypoint from the list, then press ENT . The waypoint information
screen appears.