Emerson UW - Manual (Page 5)

Deck Plate
Mounting Gasket
Property Damage: Do not pinch or break copper
tubing. Do not distort the last 1 inch of tubing.
2
■ ■
Unpack faucet components.
■ ■
On a firm, flat surface, carefully
straighten the copper tubing.
A
C
D
INSTALLING THE FAUCET
5
■ ■
Slide plastic mounting gasket over
all tubes descending from faucet
body and seat mounting gasket into
bottom of faucet until flush.
■ ■
Position supplied deck plate over
the hole into which the faucet will
be installed.
■ ■
With mounting gasket in place, feed
tubes down into hole until faucet
rests on deck plate (see illustration).
B
■ ■
From under the sink, place the
metal mounting plate onto the
threaded stud.
■ ■
Make sure faucet head is at the
desired angle.
■ ■
Place the supplied lock washer and
hex nut on to the threaded stud.
■ ■
Tighten to secure the faucet to the
sink top. Do not overtighen.