Electrolux Air-o-chill 726693 - Manual (Page 2)

Electrolux air-o-chill
Blast Chillers 50 kg - 10 GN 1/1
Internet: http://www.electrolux.com/foodservice
HDAB020
2009-10-06
Subject to change without notice
WATER REMOTE UNIT BLAST CHILLER LW 50KG 880032
TROLLEY FOR SLIDE-IN RACK 6&10X1/1GN 922004 922004
TRAY RACK+WHEELS 8X1/1GN, 80MM PITCH 922009 922009
TRAY RACK+WHEELS 10X1/1GN, 65MM PITCH 922006 922006
THERMAL COVER FOR 10X1/1GN 922013 922013
SLIDE-IN RACK SUPP.10 1/1 BC+BCF 50KG-LW 881028 881028
RILSAN COATED GRID 881061 881061
PRINTER FOR HACCP BASIC VERSION 881532 881532
PASTRY(400X600)RACK+WHEELS-80MM,10 1/1LW 922066 922066
PAIR OF 1/1 GN AISI 304 S/S GRIDS 921101 921101
KIT HACCP EKIS 922166 922166
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW 880183 880183
KIT 4 WHEELS FOR BLAST C/FREEZERS 880111
KIT 3 SINGLE SENSOR PROBES FOR BC/BCF 880269 880269
BANQUET RACK-30PLATES-65MM PITCH-10GN1/1 922015 922015
BANQUET RACK-23PLATES-85MM PITCH-10GN1/1 922071 922071
AIR REMOTE UNIT F.BLAST CHILLER LW 50KG 880029
2 SINGLE SENSOR PROBES CHILLER+C/FREEZER 880096 880096
1 SINGLE SENSOR PROBE CHILLER+C/FREEZER 880089 880089
ACCESSORIES
TRAY RACK FOR BC+BCF LW 50KG 10 GN1/1 1 1
3-SENSOR PROBE FOR CHILLER+C/FREEZER 1 1
INCLUDED ACCESSORIES
installed-electric 3.472 0.45
Power - kW
at evaporation temperature - °C -5 -10
Refrigerant power
Refrigeration power - W 7340 5950
Refrigerant quantity - g. 4415
Refrigerant type R404a R404a
N° defrost in 24 hrs. 6 6
Compressor power - HP 2; 8
Max load capacity - trays h 65 mm - n° 10 10
Trays type GN 1/1; 600x400 GN 1/1; 600x400
Door hinges Left Left
N° and type of door 1 1
height 1730 1730
depth/with open doors 995 995
width 895 895
External dimensions - mm
Thermometers Digital Digital
Thermostat Electronic Electronic
Cooling unit Built-In Remote
Gross capacity (D.I.N. 8952) - l. 560
UK Guide lines - chilling / freezing 50 50
NF Regulations - chilling / freezing 36 36
Productivity per cycle - kg.
Type Blast Chiller - 50 kg Blast Chiller - 50 kg
TECHNICAL DATA
AOCP101C
726693
AOCP101CR
726694
CONSTRUCTION
• Internal and external finishing in 304
AISI stainless steel and back panel in
stainless steel.
• High density polyurethane
insulation, 60 mm tickness, HCFC
free.
• Environmentally friendly: R404a as
refrigerant fluid.
• Developed and produced in ISO
9001 and ISO 14001 certified factory.
• Inner cell with fully rounded corners.
• Door equipped with removable
magnetic gasket with hygienic design.
• Motors and fan waterproof
protected IP20.
• Evaporator with antirust protection.
• Ventilator (fan) swinging hinged
panel for access to the evaporator for
cleaning.
• Automatic heated door frame.
• Hot gas defrosting system.
• Solenoid valves.
• 1 thermostatic expansion valve.
• Feet 150 mm high.
• Stand alone printer as optional, built
in on request.
• PC connection on request, gate RS
485.
INSTALLATION
• No water connections required.
• Waste water can be plumbed into
drain, but can also be collected in an
optional waste container.
*NF HYGIENE ALIMENTAIRE
certifying authority : AFAQ AFNOR
CERTIFICATION. Adress:11, Avenue
Francis de Pressense - 93571
Saint-Denis La Plaine Cedex - France.
Conformity with regulation NF031.
Certified guarantees: fitness for
cleaning, thermal performance.
Installation diagram:
C - Water drain
I - Electrical connection
Y - Connection for appliance lifting
L - Remote electrical connection
N - Cooling water inlet
O - Cooling water outlet