Playtive BOARD SWING - Manual (Page 3)

5
Different fastening hooks
Only fasten the swing unit to an appropriate retention system.
These are:
No. 1: a closed retaining grommet, which is secured to the swing element by
a carabiner.
No. 2: a circular hook, which is bent by at least 540° to prevent
unintentional detachment.
Tip
The eye of the retaining grommet (A) must be attached at a
right angle to the direction of the swing so that the fastening
element of the swing is not damaged too much during use.
Discontinue use of the swing as soon as the
fastening element shows fractures or cracks on
the upper grommet.
Fig. 1 Fig. 2
(A) (A)
Fig. 3
No. 1 No. 2