Agency approvals, Led diagnostic characteristics – Elo TouchSystems IntelliTouch SecureTouch User Manual
Page 80
B-68
I n t e l l i T o u c h / S e c u r e T o u c h G u i d e
LED Diagnostic Characteristics
A green LED (D1) indicates controller status as follows:
A second LED (D6) indicates USB status as follows:
Agency Approvals
• Elo controllers are “CNR/USR” UL Recognized Components for USA and
Canada, Category NWGQ2, Information Technology Equipment Including
Business Equipment.
• Elo controllers are TUV Bauart certified as components.
• Elo controllers have been tested for compliance with FCC Part 15 Class B
limits
*
.
• Depending on the application, it may be necessary to pay special attention to
system grounding and shielding, and it may be necessary to apply ferrite
suppressor beads.
LED Blink Rate
Function
Once per second
Normal condition, untouched state
On continuously
Touched state
Twice per second
Error detected
LED State
Function
OFF
Controller is not enumerated on USB
ON
Controller is enumerated on USB, but there is no data transfer
Blinking
USB data transfers between controller and host are occurring