Rocktrail Z29592 - Manual (Page 23)

23 GB
j Press the RESET 1 or ST. / STP. 4 button to select the
town you wish to have.
note: The towns are indicated by means of letter
codes. Please consult the table in the section called
“Regulating the default settings for language, time, date”
to find the code you want.
note: The display
5 shows the local time in each
case beneath the code.
j Press the ALTI / BARO button 3 to leave the world time
mode.
Q
Using the altimeter
CAUTIOn! Never use the altimeter on an aeroplane.
note: If the height measured is more than 9164 m /
30065 ft, “HI” will appear in the display
5 .
note: If the height measured is less than – 706 m /
– 2316 ft, “LO” will appear in the display
5 .
j Press the ALTI / BARO button 3 until ALT appears in
the display 5 .
j Press the ST. / STP. button 4 for 2 seconds to choose
between the units of meters (m) and feet (ft).
note: The weather station automatically updates the
altimeter.