Cleaning, Timer control, Charging a usb device – Tronic TLG 1000 C5 User Manual

Page 11: Cleaning the housing

Advertising
background image

8

TLG 1000 C5

GB

Timer control

In addition, this battery charger has a timer control which automatically switches
over to retention charging after 17 hours. This serves as an additional protection
against overcharging should the charge termination not respond due to a possibly
defective battery.

Charging a USB device

IMPORTANT

►

Ensure that the power consumption of the USB device is not higher than
1000 mA. For more information, refer to the instruction manual of your
USB device.

♦

Insert the USB connector of the USB device into the USB output

5

of the

battery charger.

♦

If necessary, switch the USB device on.

NOTICE

►

You can simultaneously charge batteries in the battery charger and a USB
device at the USB output

5

. Be aware that the charging current for the batter-

ies is thereby halved and the charging process thus takes somewhat longer.

Cleaning

DANGER

►

Always remove the plug before cleaning the device. There is the risk of an
electric shock!.

►

When you are cleaning the device ensure that no moisture gets inside it, so
as to avoid irreparable damage to it.

IMPORTANT

►

Do not use aggressive or abrasive cleaning agents, as these can damage
the upper surfaces.

Cleaning the housing

♦

Clean the surfaces of the device with a soft, dry cloth. For stubborn soiling
use a lightly moistened cloth.

♦

Never clean the insides of the charging slots with moist cloths. Instead, use
a clean soft brush to clean them.

♦

If soiled, clean the charging contacts with a dry cloth.

IB_100039_TLG1000C5_LB4.indb 8

IB_100039_TLG1000C5_LB4.indb 8

25.06.14 17:02

25.06.14 17:02

Advertising
This manual is related to the following products: