Tronic TLG 1000 C4 - Manual (Page 35)

32 TLG 1000 C4
GB
MT
Charging a USB device
IMPORTANT
► Ensure that the power consumption of the USB device is not higher than
1000 mA. For more information, refer to the instruction manual of your
USB device.
♦ Insert the USB connector of the USB device into the USB output 5 of the
battery charger.
♦ If necessary, switch the USB device on.
NOTICE
► You can simultaneously charge batteries in the battery charger and a USB
device at the USB output
5 . Be aware that the charging current for the batter-
ies is thereby halved and the charging process thus takes somewhat longer.
Cleaning
DANGER
► Always remove the plug before cleaning the device. There is the risk of an
electric shock!.
► When you are cleaning the device ensure that no moisture gets inside it, so
as to avoid irreparable damage to it.
IMPORTANT
► Do not use aggressive or abrasive cleaning agents, as these can damage
the upper surfaces.
Cleaning the housing
♦ Clean the surfaces of the device with a soft, dry cloth. For stubborn soiling
use a lightly moistened cloth.
♦ Never clean the insides of the charging slots with moist cloths. Instead, use
a clean soft brush to clean them.
♦ If soiled, clean the charging contacts with a dry cloth.
IB_87964_TLG1000C4_LB5.indb 32 IB_87964_TLG1000C4_LB5.indb 32 27.02.13 11:12 27.02.13 11:12