Epson ActionNote - Manual (Page 36)

If you want to delete a password, move your cursor to the
Security option and press or until you see the
Disabledoption.
Whenever you change or delete your password using the
SETUP program, make sure you save the new settings as you
exit the program.
Setting the Hard Disk Drive(s)
The SETUP program lets you set the type of hard disk drive
installed in your computer. The system is set at the factory for
the type of hard disk drive installed, so you should only change
this setting if you purchase an additional Epson ActionNote
drive with a different capacity.
Caution
Use only the appropriate removable hard disk drives
designed for your ActionNote computer, Inserting an
incompatible drive could damage your system.
Drive C options are as follows:
None
Type 1 (85MB)
Type 2 (120MB)
Type 49 (userdefined).
When you install another Epson ActionNote hard disk drive,
choose the drive type number that matches your drive’s
parameters. Future drives with higher capacities may require
you to define your own drive type; see the next section.
Running SETUP 2-9