United Office Strip Cut Shredder - Manual (Page 9)

9 GB
Troubleshooting / Disposal / Warranty
Troubleshooting
Problem Diagnosis and cause Remedy
Appliance does not
function Is the mains power plug correctly
inserted into the socket? Insert the mains power plug correctly
into the socket.
Is the sliding switch 1 in the 'Auto'
position?
Set the sliding switch 1 to the 'Auto'
position.
Does the motor not start when the
paper is inserted? Insert the paper into the paper feed
in such a way that it makes contact
with the sensor in the middle.
The appliance does not
function any longer after
a lengthy period of
operation, or it stops
during operation. Has the appliance been in operation
uninterruptedly for a lengthy period
of time? Is the surface of the appli-
ance warm? If so, then the permitted
operating cycle has probably been
exceeded. Pull the mains power plug out of the
socket and allow the motor to cool
down to room temperature. For oper-
ating cycle, see chapter on 'Technical
Data'.
Paper blockage Have you inserted more than the per-
mitted paper capacity (see chapter
on 'Technical Data')? Has the paper
not been inserted in a straight align-
ment into the paper feed? Remove the paper blockage, see
chapter on 'Clearing a material
blockage'.
Disposal
The packaging is made entirely of recy-
clable materials which you can dispose
of at your local recycling facilities.
Contact your local community or municipal admin-
istration for more details on how to dispose your
worn-out product.
To help protect the environment, please
dispose the product properly, and not in
the household waste, when it has
reached the end of its useful life. Infor-
mation on collection points and their
opening hours can be obtained from
your local authority.
Warranty
ATTENTION! PLEASE KEEP IMPORTANT
WARRANTY DOCUMENTATION!
Dear customer,
we are pleased that you have decided on a quality
product. Should an unexpected technical problem
arise with your appliance, please note the follow-
ing points:
– The warranty period for your appliance is
36 months.
– Please keep the receipt and the original
packaging.
– Should a problem arise, please first call our
hotline on:
00800 100 22 100 (International)
Our expert staff can usually help you via the
phone.
[email protected]
– If the fault can not be rectified via the phone,
we would ask you to send the appliance in its