United Office UAV 220 A2 - Manual (Page 5)

- 2 -
Cross Cut Shredder
Introduction
Congratulations on the purchase of your new appli-
ance.
You have clearly decided in favour of a quality
product. These operating instructions are a part of
this product. They contain important information in
regard to safety, use and disposal. Before using the
product, familiarise yourself with all of these opera-
ting and safety instructions. Use the product only as
described and only for the specified areas of appli-
cation. Retain these instructions for future reference.
In addition, pass these documents on, together with
the product, to any future owner.
Intended Application
This appliance is only suitable for shredding paper,
credit cards, CDs/DVDs and small staples (sizes:
24/6 and 23/6 (11.5 x 6mm), B-8 (11.5 x 7mm),
No10 (8.4 x 5mm)) and paper clips (up to 25 mm)
in private households. All other usages or modifica-
tions are regarded as improper and carry a significant
risk of accidents. Do not use this appliance for com-
mercial purposes.
Items supplied
Cross Cut Shredder
(Cutter attachment, waste container large/small)
Operating instructions
Appliance description
Figure A:
q Cutter attachment
w Small waste container
e Viewing window
r Large waste container
Figure B:
t Cutter opening for CDs/credit cards
y Cutter opening for paper
u Switch
Technical details
Input voltage: 220 - 240 V ~, 50 Hz
Rated current : approx. 1.0 A
Nominal power: 220 W
Protection class: II
Large waste container: 21 litres
Cutting process for
paper:
Cross-cut,
4 x 18 mm particles
Safety level 4
Working width: 220 mm
Cutting capacity: 8 sheets (80 g/m 2 )
Overheating protection
This appliance is fitted with overheating protection.
If the motor overheats due to overloading, the appli-
ance switches itself off automatically. If this occurs,
proceed as follows:
Caution:
Remove the power plug from the wall socket to avoid
unintended starting of the appliance
• Switch the appliance off by moving the switch u
to the middle position "OFF".
• Empty the waste containers w / r .
• Allow the appliance to cool down.
• Put the plug back into the socket.
• Switch the appliance on by moving the switch
u
to the "AUTO" position.
We recommend that you let the appliance cool down
for about 30 minutes after 3 minutes of operation.
IB_100159_UAV220A2_LB4.qxp 08.07.2014 11:12 Uhr Seite 2