Evolution – Evolution Technologies EVO8 User Manual

Page 6

Advertising
background image

1

10

0

Evolution²

9

9

CONNECTING HIFI SPEAKERS

POSITIONING FRONT SPEAKERS

Single wired a single amplifier, link bars are fitted

Bi-wired – a single amplifier, with separate wires
to drive the bass/mid unit and the treble unit.
Note that the wiring link bars are removed.

Bi-amplified – two amplifiers.
One drives each section.
Note that the wiring link bars are removed.

Important Note, please make sure that heavy multi-standard
cables are well connected and clamped. Single loose strands
arcing can cause a noise in the woofers like a faulty speaker.

Evolution²

Angle speakers inward by 5º to 30º
for a clearer, more tuneful mid range.

If the loudspeakers are placed too close to the walls the bass will increase but may
be boomy and indistinct. If the loudspeakers are placed further away from the
walls, the inward angle may be increased by upto 40%, although this may restrict
the width of the optimum listening position. As personal taste plays a large role,
experiment with different configurations and play a wide range of programme
before finalising the position of your speakers.

Using sseparate ccables ffor
treble aand bbass uunits iin aa
Bi-w

wiring cconfiguration

reduces iintermodulation
effects aand iimproves
headroom aand cclarity. TTo
Bi-w

wire, yyou w

will nneed tto

install ttwo llengths oof ttwin
core ccable bbetween tthe
amplifier aand eeach lloud-
speaker.
Unscrew eeach tterminal aa
few tturns aand rremove tthe
metal sstraps.
Connect tthe ccables bbetween
the aamplifier aand tthe lloud-
speakers aas iindicated aand
re-ttighten aall tthe tterminals
securely.
Note: SSome aamplifiers hhave
two ppairs oof ooutput tterminals
to ffacilitate bbi-w

wiring bbut tthis

is nnot eessential. TThe aadvan-
tages oof bbi-w

wiring aare ffully

retained iif yyour aamplifier hhas
only oone ppair oof ooutput tter-
minals pper cchannel ((as iin
the iillustration).

Positioning the speakers. Place the speak-
ers so that you are the same distance from
each. The distance between the speakers
should be the same as between you and
the speakers.

For best results the speakers should be at
least 10 inches (20cm) in front of a wall
and at least 30 inches (70cm) from any
corner.

RIGHT

SPEAKER

LEFT

SPEAKER

RIGHT

SPEAKER

LEFT

SPEAKER

70cm

20cm

Amplifier

Amplifier

Pacific Evo220066.qxd 18/10/2006 10:23 Page 8

Advertising
This manual is related to the following products: