Fig.1 fig.2, Fig.3 fig.4 fig.5, Battery fitting 4. operation – Sealey TP80 User Manual
Page 2
3. BATTERY FITTING
4. OPERATION
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: Call us for a copy of our latest catalogue and promotions on 01284 757525 and leave your full name and address including postcode.
3.1.
Slide battery compartment open as in fig.1.
3.2.
Insert 2 x AA batteries as in fig.2, observing the correct polarity.
3.3.
Replace sliding cover.
3.4.
Removal of the batteries is the reverse of 3.1 to 3.3.
fig.1
fig.2
4.1.
Remove the pump from the holder (fig.3), which may be hooked onto the handle of the jerry can using the hanging hook provided (fig.4)
4.2.
Lower the pump stem into the jerry can until it rests on the base of the can.
4.3.
Place the delivery nozzle into the receiving container; the nozzle may be either wedged or clipped in place using the attached moulded
spigot.(see fig.5.1)
4.4.
To start the pump, slide the switch (fig 5.2)
4.5.
The pump will switch off automatically when the dispensed liquid reaches the stop line (fig.5.3) or manually at any point before then.
The pump is fitted with an anti-vacuum valve to prevent syphoning.
4.6.
DO NOT leave the pump unattended whilst it is running.
fig.3
fig.4
fig.5
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycle centre and disposed of in a manner which is compatible with the environment.
Battery Removal
Remove the batteries as in section 3. Dispose of battery according to local government guidelines.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme.
Jack Sealey Ltd’s Batteries Producer Registration number (BPRn) is
BPRN00705
TP80 Issue:1 14/03/14
Original Language Version
© Jack Sealey Limited