Sealey TP94 User Manual
Page 2
Original Language Version
©Jack Sealey limited
TP94.V2 Issue: 1 - 26/06/14
4. OPERATION
5. MAINTENANcE
WARNING! Not for use with petrol or volatile liquids within flash point range -20
o
c to +80
o
c
WARNING! Damage will occur if the pump is run dry. Only for use when submerged in liquid.
IMPORTANT! Ensure polarity and voltage (12Vdc) are correct before use.
IMPORTANT! Motors damaged due to dry running, incorrect polarity and/or incorrect voltage will not be covered
under warranty.
4.1. Prepare pump for use. ensure that the impeller guard, filter and end cap are all in place and that the hose is firmly attached.
ensure the seal around the power cable is in place and that the seal cap is screwed tightly down.
IMPORTANT! Should any of the above items appear damaged or in some way malfunctioning DO NOT ATTEMPT TO
USE THE PUMP.
contact your authorised service agent for information and repairs.
4.2. Submerge pump in liquid to be transferred.
4.3. Position stainless steel nozzle as required.
4.4. Attach battery clips to appropriate terminals - take great care and keep clips and battery well away from any liquids.
IMPORTANT! Pump will deliver immediately - be sure to have the pump submerged and the hose correctly
positioned before battery clips are connected.
4.5. Should the pump’s performance deteriorate significantly during usage, remove battery clips from terminals and remove pump
from the liquid.
unscrew end cap and check that it is not blocked. Also check that the filter and impeller are not clogged.
Remove any blockages, reassemble pump and continue use.
IMPORTANT! Do not exceed 15 minutes continuous run time in every 30 minutes.
5.1. unscrew the end cap for periodical cleaning of the filter. It is recommended that the filter be cleaned after use in particularly
viscous liquid, or where a significant amount of suspended matter was present in the liquid.
5.2. Check the impeller regularly for any build-up of foreign matter. Clean if necessary.
WARNING! The warnings, cautions and instructions referred to in this manual cannot cover all possible conditions and
situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycle centre and disposed of in a manner which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way.
v
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and compo-
nent parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name
and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey
Group, Kempson Way, Suffolk
Business Park
, Bury St. edmunds,
Suffolk,IP32 7AR
www.sealey.co.uk