Fig.1 fig.3 fig.4, Fig.2 – Sealey SNA9821 User Manual
Page 2
Page. 2
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
ImpORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORmATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
www.sealey.co.uk
Web
sole UK Distributor, sealey
Group, Kempson Way, Suffolk
Business Park
, Bury St. Edmunds,
Suffolk, IP32 7AR
fig.1
fig.3
fig.4
4.1.
the handle can be attached on either side of the nibbler attachment, so that either Die and Punch
can be used, therefore doubling the life of the nibbler attachment.
4.2.
to replace a Die, undo the appropriate Fixing Screw, use the combination tool to undo the Die from
the main body of the nibbler attachment. Fit a new Die and tighten it to the body and tighten the Set
Screw (fig.3).
4.3.
To replace the Punch, firstly remove the Die as above. Take off the Circlip and Cover and undo the
Set Screw and Nut. Slide out the Punch. Fit a new Punch aligning the fixing hole in the Punch with
the Sliding Block (fig.4). Re-fit the Set Screw and nut, Cover and Circlip. Re-fit the Die.
4.4.
Regularly ensure all screws and parts are tightened.
Replacement Parts:
Punch: . . . . . SnA9821P
Die: . . . . . . . SnA9821D
Original Language Version
SnA9821 Issue: 1 - 29/01/10
4. mAINTeNANce
fig.2