Sealey AP6150GS - Manual (Page 2)

4.4 Decide the shelf positions for the upper section of the shelves
and assemble two more end frames, each using 2 leg angle
sections and 3 short shelf supports ensuring that the shelf
supports are at the same height on both frames. The upper half
can be joined to the lower half by using the lower shelf supports
as shown in Fig.3. If the lower shelf is not positioned at the
centre of the frame use the special joining pieces supplied as
shown in Fig.4.
4.5 When both upper end frames are in place join them together
with the remaining 6 long shelf supports ensuring that they are
at the same height as the short shelf supports.
4.6 See Fig.5. When the frame is complete attach the plastic floor
protectors to the bottoms of the angle sections. Get a second
person to steady the frame while this is done.
4.7 See Fig.6. Move the frame into position in the chosen area.
Place the 5 MDF shelves onto the shelf supports.
4.8 See Fig.7. To assemble as a bench/low level shelving unit make
up two separate frames following steps 4.1 to 4.3 but with
different shelving positions. Make up one frame with 3 shelves
and one frame with two shelves as shown below. Ensure that the
middle and top shelves on both frames are at the same height.
Fix the frames together with the four nuts and bolts supplied.
Place the 5 MDF shelves into position in the frames.
4.9 See Fig.8. To assemble as a corner unit make up two separate
frames following steps 4.1 to 4.3 but with different shelving
positions. Make up one frame with 3 shelves and one frame with
two shelves as shown below. Ensure that the middle and top
shelves on both frames are at the same height. Fix the frames
together with the four nuts and bolts supplied. Place the 5 MDF
shelves into position in the frames.
Fig.3
Fig.6
Fig.4 Fig.5
Fig.7
Fig.8
AP6150GS Issue No:2 (L) 21/10/14 Original Language Version © Jack Sealey Limited
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling
centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires
disposal, drain off any fluids (if applicable) into approved containers and dispose of the product and the fluids according to local regulations.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.