Electrolux D-90327 - Manual (Page 10)

10
Overriding the child safety lock
The child safety device can be released in this way for a single cooking
session; it remains activated afterwards.
Safety cut-out
Cooking surface
• If after switching on the appliance a heat setting is not set for a
cooking zone within approx. 10 seconds, the appliance automatically
switches itself off.
• If one or more sensor fields are touched for longer than approx. 10
seconds, the cooking surface is automatically switched off. ER03
flashes on the display or changes to
h if there is still residual heat.
• If all cooking zones are switched off, the cooking surface automati-
cally switches itself off after approx. 10 seconds.
Control panel
3
Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel
switches all cooking zones off.
Cooking zones
• If one of the cooking zones is not switched off after a certain time, or
if the heat setting is not modified, the relevant cooking zone switches
off automatically.
h is displayed.
Step Control panel Display
1. Switch on the appliance
l
/
h
(if hot)
2.
Touch of the front right
cooking zone and at the
same time
4 x
¾
Decimal points flash
Until the appliance is next switched off, it can used as normal.
Heat setting Switches off after
1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours