Sealey MPS8 - Manual (Page 2)

NOTE: The stand needs to be used in conjunction with suitable external motorcycle support to ensure full stability.
Although the support stand can be operated by one person, we advise seeking the assistance of a second person. A concrete
deck working area is recommended (tarmacadum may become unstable).
4.1. Support stand placement (fig.3).
4.1.1. With the foot pedal vertical (fig.1) and the platform at minimum height, slide the stand beneath the point to be lifted. Choose a point
with mechanical integrity.
4.1.2. Check the load bearing support bars will not crush or deform cables, pipes, exhaust or panels.
4.1.3 With external support options available, slowly raise the motorcycle wheels off the concrete deck using the foot pedal (fig.2). If stiction
occurs in the linkage at the start of the lift additional force may be required.
 IMPORTANT! Ensure that the foot pedal travels full stroke to obtain the "over centre" locking of the toggle linkage. This is a
safety feature which mechanically locks the lift at full height preventing accidental descent.
4.1.4 Check that the motorcycle is stable on the stand and suitably supported before servicing or leaving it.
4.2. Removing the stand.
4.2.1. Continuing to support the motorcycle, lift the pedal slightly to release the "over centre" mechanical lock, once this occurs the weight of
the motorcycle may be enough to slowly lower to the concrete deck. A pin jointed damper connected to platform and base frame
ensures slow controlled descent.
4.2.2 When descent is complete slide the stand away from beneath the motorcycle.
5.1. When the stand is not in use, store it in a safe, dry, childproof location.
5.2. Keep the stand clean and wipe off any oil or grease.
5.3. Before each use, check all parts. If any part of the stand is damaged or defective, remove it from service and take the necessary action
to remedy the problem.
5. MAINTENANCE
4. OPERATING INSTRUCTIONS
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version MPS8 Issue: 1 - 08/02/13 © Jack Sealey Limited 2013
fig.3
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
fig.3