Sealey RPS7 - Manual (Page 2)

NOTE: The stand needs to be used in conjunction with suitable external motocycle support to ensure full stability.
Although the support stand can be operated by one person, we advise seeking the assistance of a second person. A concrete
deck working area is recommended (tarmacadum may crumble).
5.1. Support stand placement (fig.3).
5.1.1 Decide on pick up points on wheel axis and measure distance between.
5.1.2 Keeping the carrier jaws central about the frame, adjust to required gap.
5.1.3 With the handle vertical as in (fig.1) and the motorcycle held, roll the stand to straddle the axle to be lifted. The jaws sweep in an arc
and it will be necessary to adjust stand position by eye to align with lifting points.
5.1.4 Raise the motorcycle wheel off the deck by swinging the handle to the horizontal position shown in (fig.2 & 3) and apply castor brakes.
5.1.5 Check that the motorcycle is stable on the stand and suitably supported before servicing or leaving it.
5.2. Removing the stand.
5.2.1. Continuing to support the motorcycle, release the castor locks and slowly lift the handle. Once the stand forks are vertical the weight of
the motorcycle will begin to influence the lowering force, keeping a firm grip on the handle slowly lower the motorcycle to the concrete
deck.
5.2.2 When descent is complete roll the stand away from beneath the motorcycle.
6.1. Before each use, check all parts. If any part of the stand is damaged or defective, remove it from service and take the necessary action
to remedy the problem.
6.2. Keep the stand clean and wipe off any oil or grease.
6.3. When the stand is not in use, store it in a safe, dry, childproof location.
6. MAINTENANCE
5. OpERATING INSTRUCTIONS
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMpORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version RPS7 Issue: 1 - 08/02/13 © Jack Sealey Limited 2013
fig.3
Environmental protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
4. pARTS
Item Description Qty
1 Tripod frame 1
2 Handle 1
3 Pivot fork 2
4 Outrigger 1
5R Carrier jaw 1
5L Carrier jaw 1
6 Shoulder pin 2
7 Trailing castor 2
8 Leading castor 1
9 M10 x 45 domed hd scr. stiff nuts & washers 2-sets
10 M10 x 16 domed hd scr. 2
11 M10 X 40 hex hd scr. and washers 2-sets
12 M10 hex nut 3
13 Clip 2
14 Rubber covers 2
Raise the motorcycle wheel off the deck, see 5.1.4.