Vitek VT-1898 BK - Manual (Page 7)

7
ENGLISH
Cleaning the outlet filters (24, 25, 26)
• Switch the vacuum cleaner off and unplug it.
• Remove the outlet filter grid (23) by press-
ing the locks (27) and remove the HEPA-filter
(25). Remove the outlet filter (24) from the
grid (23) and remove the protective filter (26)
from the air outlet of the vacuum cleaner.
• Wash the filters (24, 25, 26) under slightly
warm water jet. Do not wash filters in a dish-
washing machine.
• Dry the filters (24, 25, 26). Do not dry filters
with a hairdryer.
• Install the filter (24) into the grid (23) accord-
ing to its form. There are guides inside the grid
(23) for secure fitting of the filter (24).
• Install the protective filter (26) into the vac-
uum cleaner air outlet and then install the
HEPA-filter (25).
• Install the outlet filter grid (23) with the
installed filter (24) back to its place.
Notes:
– Before installing the filters (21, 24, 25, 26)
make sure that they are dry.
– Do not dry the filters (21, 24, 25, 26) with a
hairdryer.
Vacuum cleaner body
– Wipe the vacuum cleaner body with a soft,
slightly damp cloth and then wipe it dry.
– Do not immerse the body of the vacuum
cleaner, the power cord and the power plug
of the unit into water or other liquids. Provide
that no liquid gets inside the vacuum cleaner
body.
– Never use solvents or abrasives to clean the
surface of the vacuum cleaner.
STORAGE
• Before taking the vacuum cleaner away for
long term storage, clean its body, the dustbag
and the filters (21, 24, 25, 26).
• For easy storing use the horizontal or vertical
brush storage (28).
• Keep the vacuum cleaner away from children
in a dry cool place.
DELIVERY SET
1. Vacuum cleaner with the filters
and the cloth dustbag installed – 1 pc.
2. Flexible hose – 1 pc.
3. Telescopic extension pipe – 1 pc.
4. Floor/carpet UltraClean brush - 1 pc.
5. UltraClean brush attachment for furniture
2 in 1 – 1 pc.
6. Telescopic crevice nozzle – 1 pc.
7. Attachment holder – 1 pc.
8. Additional cloth dustbag – 1 pc.
9. Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Supply voltage: 220-240 V ~ 50 Hz
Power consumption: 1800-2200 W
Suction power: 450 W
The manufacturer reserves the right to change
the unit specifications without a preliminary noti-
fication
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
IM VT-1898.indd 7 29.07.2016 14:34:52