Electrolux 60160 TK - Manual (Page 9)

Installation
9
☞
1. Detach the worktop.
2. Unscrew the door hinge (A) and
screw it into place on the opposite
side.
3. Refit the worktop.
4. Tilt the appliance slightly towards
the rear and prop it securely.
5. Unscrew the door hinge screws (K)
and remove the hinge pin bracket
(1).
6. Unscrew the handle. Refit it on the
opposite side after having pushed in
the plugs with a punch. Cover the
holes left open with the plugs con-
tained in the documentation pack.
Reversing the Door
The side at which the door opens can be changed from the right side
(as supplied) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appli-
ance must not be connected to the mains. Remove plug from the
mains beforehand.
AEG97
K
1
C A