Eiki LC-X986 - Manual (Page 20)

20
BASIC OPERATION
ADJUSTING SCREEN
Message disappears after 4 seconds.
Message disappears after 4 seconds.
Zoom
Focus
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1 Press ZOOM button on Top Control or ZOOM ▲ / ▼ button on
Remote Control Unit to display a message “Zoom”.
2 Press ZOOM ▲ button or POINT UP button to make image
larger, and press ZOOM ▼ button or POINT DOWN button to
make image smaller.
1 Press FOCUS button on Top Control or FOCUS ▲ / ▼ button on
Remote Control Unit to display a message “Focus”.
2 Adjust focus of image by pressing FOCUS ▲ / ▼ button or
POINT UP/DOWN button(s) .
Lens shift
LENS SHIFT ADJUSTMENT
1 Press LENS SHIFT button on Top Control or LENS SHIFT ▲ / ▼
button on Remote Control Unit to display message “Lens shift”.
2 Press POINT UP button or LENS SHIFT ▲ button to move
image up, press POINT DOWN or LENS SHIFT ▼ button to
move image down.
KEYSTONE ADJUSTMENT
1 Press KEYSTONE button on Remote Control Unit or select
Keystone on SETTING menu (Refer to page 35.) to display a
Keystone dialog box.
2 Correct keystone distortion by pressing POINT
UP/DOWN/LEFT/RIGHT button(s). Press POINT UP button to
reduce upper part of image, and press POINT DOWN button to
reduce lower part. Press POINT LEFT button to reduce left part,
and press POINT RIGHT button to reduce right part.
Reduce upper width with
POINT UP button. Reduce lower width with
POINT DOWN button.
If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
• Arrows are white in no correction.
• Arrow(s) of direction being corrected turn(s) red.
• Arrow(s) disappear(s) at maximum correction.
NOTE;
Focus adjustment may not function properly if the image is
corrected by KEYSTONE adjustment.
Reduce the left part with
POINT LEFT button. Reduce the right part with
POINT RIGHT button.