EverFocus EAN800AW - Manual (Page 26)

EAN800A/EAN800AW
26
BLC: Select ON or OFF for Backlight Compensation.
ON: When the background of the subject is very bright and the subject
itself is dark, set the BLC ON. The BLC will measure the light of the
image center and the lens iris will automatically set for optimum image
quality.
OFF: Backlight will not be compensated.
FL: Select ON or OFF for Flickerless.
ON: When picture flicker fiercely, turn FL on, then the camera will stabilize the
speed of electronic shutter automatically, and reduce the flicker immediately.
OFF: Disable Flickerless function.
ES: Select ON or OFF for Electronic Shutter.
ON: the auto control of the shutter speed can be performed according to the
brightness of the screen.
OFF: Disable electronic shutter.
H-Mirror: Select ON or OFF for Horizontal Mirror.
ON: Enable a horizontal image inversion.
OFF: Disable the inversion.
D/N: Select ON or OFF for Day/Night function.
ON: Enabling the image to turn from color to B/W when the illumination is about
5 Lux
OFF: Disable D/N function.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
Note:
1. If ES is on, FL takes no effect. ES>FL
2. If AGC is off, BLC has no effect., BLC works when AGC is on. AGC > BLC
3. AGC must be on to Day/Night auto switch function work.
4. If ES is on, IRIS level adjustment takes no effect, ES> IRIS level
5. If using DC driven Lens, BLC and ES should be off.