Introduction / safety advice / assembly, Technical data, Safety advice – Livarno Z30846 User Manual

Page 11: Assembly

Advertising
background image

13

GB/MT

Introduction / Safety advice / Assembly

6 Caps
1 Assembly instructions

Technical data

Dimensions: approx. 42 x 60 x 34 cm (W x H x D)
Material: MDF,

chipboard

Max. load: 20 kg for top panel

10 kg per drawer

Safety advice

KEEP ALL THE SAFETY ADVICE AND INSTRUC-

TIONS IN A SAFE PLACE FOR FUTURE

REFERENCE!

RISK OF LOSS

OF LIFE OR ACCIDENT TO IN-
FANTS AND CHILDREN! Never

leave

children unsupervised with the packaging

materials. Danger of suffocation. This product is
not a toy!

CAUTION! RISK OF INJURY! Make sure

that all parts are undamaged and assembled
correctly. Improper assembly carries a risk of
injury. Damaged parts may affect the safety
and function of the product.

CAUTION! Do not leave children unsupervised!

The product is not a climbing frame or a toy!
Make sure that nobody, especially a child, climbs
on or leans against the product. The wall fasten-
ings could be torn out of the wall and the prod-
uct could tip over, resulting in injury or damage.

DANGER OF ELECTRIC SHOCK!
DANGER OF DAMAGE TO
PROPERTY! DANGER OF IN-

JURY!

Ensure that you do not strike electrical

cables, gas or water pipes when you are drilling
into the wall. If necessary, check the wall using
a suitable detector before you drill.

Examine the wall before installation and choose
suitable installation fixings. We have supplied
fixings suitable for an ordinary solid masonry wall.

CAUTION! FIRE HAZARD! Do

not position the product near an
open fire and / or radiant heaters.

Make sure that this product is standing on a
solid, level surface.

Distribute weight upon this products‘ surface
evenly so that it cannot overturn.

Regularly check the stability of all connections
and retighten the screws.

Keep the product away from water and mois-
ture. Otherwise the product may be damaged.

The safety of the product can only be ensured
if it is properly assembled and all connections
are made securely.

Check the stability of the product before you
use it.

CAUTION! Do not lift or move the product if

it is supporting any object.

CAUTION! RISK OF SHEAR-

ING OR CRUSHING INJURY!
Please ensure that your fingers do

not get themselves between the drawers and
the carcass when you are opening or closing
the drawers.

kg

Do not exceed the allowable maxi-
mum loads on the top panel (20 kg)
or the drawers (10 kg each). Failure

to observe this advice may lead to injury and/
or damage to the product.

Assembly

Note: Assemble the product on a scratch-resistant
floor that is sufficiently large. You may have to put
a blanket or the like down in order to avoid
damaging the product.
Note: This product requires wall mounting. Make
sure that you position the mounting material at the
right height. Otherwise you will not be able to
mount the product correctly.
Note: Assembly requires an electric drill with a
6 mm diameter drill bit and a screwdriver. Refer to
the operating instructions for your electric drill be-
fore assembly.

64100_liv_Beistellkommode_Content_LB5.indd 13

29.04.11 15:27

Advertising