Enterasys Networks ANG-1000 User Manual
Ang-1000
Advertising
Table of contents
Document Outline
- About This Guide
- Index
- About This Guide
- Overview
- Installation
- Unpacking the ANG-1000
- Connecting Cables
- Ethernet Cables
- Connecting an ANG-1000
- 1 Do one of the following as shown in Figure7:
- 2 Plug the opposite end of the blue Ethernet cable into a wall jack, patch panel, or hub linked t...
- 3 Plug an orange, straight-through Ethernet cable into the External port as shown in Figure7.
- 4 Plug the opposite end of this cable into a DSL or cable modem.
- Connecting an ANG-1000
- Ethernet Cables
- Connecting Power to the ANG-1000
- Checking ANG-1000 Connections
- Configuring the ANG-1000 with Aurorean Web Config
- Before You Begin
- Logging into Web Config
- Viewing VPN Status
- Downloading the Latest Firmware
- 1 Click the Firmware Upgrade menu option.
- 2 In the FTP server field, enter the name of the FTP server where the new ANG image is stored: an...
- 3 Type the full path of the location of the Firmware image: /ang1000/ANG1000.bin
- 4 Enter the Username anonymous
- 5 Enter netadmin in the Password and Confirm fields and click Apply.
- 6 Click Apply and watch the External/Trusted LEDs on the front panel blink displaying an inside/o...
- 7 After downloading and “flashing “are complete, a status page displays as shown in Figure18 ind...
- 8 Reboot the ANG-1000 by clicking Reboot Now.
- 9 To ensure that the image was updated, compare the date last modified, Release, Build and Patch ...
- Setting Up the VPN
- 1 Click the VPN Setup menu option.
- 1 Enter the Name of the remote ANG-3000/7000 you are connecting to.
- 2 Enter the Gateway IP address of the remote ANG-3000/7000.
- 3 Enter the Username on the remote ANG-3000/7000.
- 4 Enter the Password on the remote ANG-3000/7000.
- 5 Confirm the password on the remote ANG-3000/7000.
- 6 Select the Connection type: either EZ-IPsec or PPTP.
- 7 Optional. Click the Start network gateway now checkbox to create instant access or wait until t...
- 8 Optional. Click Force default route under Global VPN Settings.
- 9 Click Apply.
- Setting Up the Internet Connection
- Setting Up the LAN
- Setting Up the Firewall
- Setting Your Password
- Checking Device Status
- Using Advanced Utilities
- Using the Configuration Editor
- 1 Click the Configuration Edit menu option.
- 2 Click on the command of your choice.
- 3 The arguments of the command you selected are displayed in the Configuration File Edit window, ...
- 4 Edit the UNIX command and click Update or Delete.
- Configuring IP Port Forwarding
- 1 Login to Web Config.
- 2 Click on the Config File Editor menu option.
- 3 Click on the ipfwrules Configuration File.
- 4 In the Configuration File Edit window, scroll to the end of the file.
- 5 Under **Expert-Config**, type the following rules:
- 6 Click Update and Reboot Now when prompted to save the change.
- Glossary
- Specifications
- Pin Assignments
- License Agreement & Support
- Index