Elo TouchSystems 1524L Series - Manual (Page 20)

3-20 U s e r G u i d e
OSD Control Options
Control Description
Brightness Increases or decreases brightness
Contrast Increases or decreases contrast
H-Position Moves the screen left or right
V-Position Moves the screen up or down
Phase Increases or decreases the snow noise of the image after auto
adjustment is made.
Clock The dot clock is fine-adjusted after auto adjust.
OSD H-Position Moves the OSD position horizontally on the screen. When the +
button is pressed, the OSD control menu will move to the right
side of the screen. Likewise, when the - button is pressed, the
OSD control menu will move to the left side.
OSD V-Position Moves the OSD position vertically on the screen. When the +
button is pressed, the OSD control menu will move to the top side
of the screen. Likewise, when the - button is pressed, the OSD
control menu will move to the lower side.
Color Balance Press + or - to select C1/9300, C2/6500 and USER. Only when
selecting USER can you make adjustments to the R/G/B content.
Press Enter to restore to factory default setting.
Auto-Adjust Press Auto to enable this function. The Auto-Adjust will
automatically adjust V-Position, H-Position, Clock and
Clock-Phase.
Recall Defaults Returns the monitor to its default settings.
OSD Language Select from English, French, Japanese, German and Spanish.
Information Indicates the current resolution, H-Frequency and V-Frequency.