Elation Professional CMY Zoom 250 - Manual (Page 18)

CMY ZOOM 250 ™
©Elation Professional® Los Angeles, Ca. 90058 - CMY ZOOM 250™ - -
Note: After switching on, the CMY ZOOM 250™ will automatically detect whether DMX 512
data is received or not. If the data is received, the display will show "A.XXX" (XXX
representing the actual DMX address). If the fixture is not receiving DMX signal the display
will flash "A.XXX" (XXX representing the actual DMX address). This situation can occur if:
- the 3 PIN XLR plug (cable with DMX signal from controller) is not connected with the input
of the machine.
- the controller is switched off or defective, if the cable or connector is defective or the signal
wires are swap in the input connector.