Eiki LC-X1000 - Manual (Page 20)

20
KEYSTONE ADJUSTMENT
1 Press KEYSTONE ▲ / ▼ button on Remote Control Unit or select
Keystone on SETTING menu (Refer to page 35.) to display a
Keystone dialog box.
2 Correct keystone distortion by pressing KEYSTONE ▲ / ▼ button
or POINT UP/DOWN button(s). Press KEYSTONE ▲ button or
POINT UP button to reduce upper part of image, and press
KEYSTONE
▼ button or POINT DOWN button to reduce lower
part.
Reduce upper width with KEY STONE ▲ button or
POINT UP button.
Reduce lower width with KEY STONE ▼ button or
POINT DOWN button.
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.
BASIC OPERATION
ADJUSTING SCREEN
Message disappears after 4 seconds.
Message disappears after 4 seconds.
Zoom
Focus
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1 Press ZOOM button on Top Control or ZOOM ▲ / ▼ button on
Remote Control Unit to display a message “Zoom”.
2 Press ZOOM ▲ button or POINT UP button to make image
larger, and press ZOOM ▼ button or POINT DOWN button to
make image smaller.
1 Press FOCUS button on Top Control or FOCUS ▲ / ▼ button on
Remote Control Unit to display a message “Focus”.
2 Adjust focus of image by pressing FOCUS ▲ / ▼ button or
POINT UP/DOWN button(s) .
Message disappears after 4 seconds.
Lens shift
LENS SHIFT ADJUSTMENT
1 Press LENS SHIFT button on Top Control or on Remote Control
Unit to display a message “Lens shift”.
2 Press POINT UP button to move image up, press POINT DOWN
button to move image down.