EVGA 141-BL-E757 - Manual (Page 13)

EVGA X58 SLI Motherboard
13
1 - I/O Shield
Installs in the system case to block radio frequency
transmissions, protect internal components from dust, foreign
objects, and aids in proper airflow within the chassis.
1 - 2-Port SATA Power Cables
Allows a Molex power connector to adapt to a SATA power
connector.
2 - SATA Data Cables
Used to support the Serial ATA protocol and each one connects
a single drive to the motherboard.
1 - 2-Way SLI Bridge
Bridges two (2) graphic cards together which allows for
2-Way SLI.
1 - 3-Way SLI Bridge
Bridges three (3) graphic cards together which allows for
3-Way SLI.
1 – 3-Way SLI with PhysX TM Bridge
Bridges three (3) graphic cards with Physics card together
which allows for 3-Way SLI with PhysX TM technology.
1 - Installation CD
Contains drivers and software needed to setup the
motherboard.