Electro-Voice ZXA1-100 - Manual (Page 4)

Electro-Voice® ZxA1 Owner’s Manual
Description
System Features - ZxA1
Thank you for choosing the Electro-Voice ZxA1 loudspeaker system. Please take time to consult
this manual so that you can understand all the features built into your EV system and fully utilize
all its performance capabilities.
The Electro-Voice ZxA1 powered loudspeaker is a fully integrated audio system with carefully matched
electronics and transducers. This product makes it easy to setup a high quality sound system quickly
with a minimum amount of cables and external electronics.
• Two-way loudspeaker with EV8L 8” Woofer and DH2005 Titanium Compression Driver
• Rotatable High Frequency Waveguide with Two Coverage Patterns: 90° x 50° or 100° x 100°
• Integrated Amplifier with 800W Total Output
• Biamplified Design with 24 dB/Octave Filter Slopes and Transducer Protection
• Selectable 100 Hz High Pass Filter for use with an External Subwoofer
• XLR and 1/4“ TRS Combo Input
• XLR Microphone Input with Gain Control
• XLR Parallel Output
• LED Indicators for Power On and Limit
4
Specifications
1 Full Range Mode.
ZxA1-90 ZxA1-100
Freq. Response 1 (-3 dB): 60 Hz - 20 kHz
Freq. Range 1 (-10 dB): 48 Hz - 20 kHz
Max. Calculated SPL: 123 dB
Horizontal Coverage: 90° or 50° 100°
Vertical Coverage: 50° or 90° 100°
Amplifier Power Output: 800W
LF Transducer: EV8L, 203mm (8 in) Driver
HF Transducer: DH2005, 25mm (1 in) Exit Compression Driver
Crossover Frequency: 1.8 kHz
High Pass Frequency: 100 Hz, User Selectable
Power Requirement (120V): 95V - 132V, 50 - 60 Hz, 0.6A
Power Requirement (230V): 190V - 264V, 50 - 60 Hz, 0.4A
Line Input: XLR and TRS Combo
Mic Input: XLR with Independent Gain
Line Output: XLR (Mic and Line Sum)
Enclosure Material: High Impact Polystyrene
Grille: Polyester Powder Coated, 18GA Galvanized Steel
Dimensions (H x W x D): 457mm x 282mm x 264mm (17.98” x 11.12” x 10.38”)
Net Weight: 19.0 lbs (8.6 kg)
Shipping Weight: 22.7 lbs (10.3 kg)