Solid cooking fats – Silvercrest SEF3 2000 A1 User Manual

Page 14

Advertising
background image

11

SEF3 2000 A1

GB

WARNING – RISK OF INJURY!

►

The lid and the deep fat fryer become extremely hot during the deep-frying
process. Therefore, do not touch anything except the handles during deep-
frying! Risk of burns! We recommend the use of oven gloves.

3) Press the lid release button 5.

WARNING – RISK OF INJURY!

►

Take care when fi lling the frying basket 3! It will be extremely hot!

4) Lift the frying basket 3 out of the deep fat fryer. Add the food to be fried.

The frying basket 3 can be fi lled up to the MAX. fi ll level marked on the
inside of the frying basket 3 or with up to 1 kg of food for frying. However,
always take note of the frying quantity indicated on the packaging of the
food to be deep-fried!

5) Carefully lower the frying basket 3 into the hot oil or fat.

6) Close the lid of the appliance.

NOTE

►

The frying process can be monitored through the viewing window 1 in the
lid of the appliance.

Solid cooking fats

To prevent fat from spraying and the appliance from becoming too hot, please
take the following precautions when using solid frying fat:

■

When using fresh fat, start by melting the blocks of fat slowly, under low
heat, in a separate pan. Then carefully pour the molten fat into the deep
fat fryer. Only when this has been done, insert the plug into a mains power
socket and switch the deep fat fryer on.

■

After use, store the deep fat fryer with the solidifi ed fat at room temperature.

If the fat gets too cold, it could splatter out upon re-melting! To avoid this, pierce
a few holes into the solidifi ed fat with a wooden or plastic skewer. Ensure that
you do not damage the coating of the frying container 4.

■

To melt the fat, switch on the appliance using the On/Off switch 8 and set
the temperature control 7 to 130 ˚C. The Power control lamp 0 lights up.

■

Wait until all of the fat has melted. The Ready control lamp 9 may come on
and go out several times during this process. Do not set the desired frying
temperature until all of the fat has melted.

IB_102462_SEF32000A1_LB4.indb 11

IB_102462_SEF32000A1_LB4.indb 11

25.07.14 14:20

25.07.14 14:20

Advertising