Projection, Attention, Background lighting for the display and projection – Silvercrest SPUV 90 A1 User Manual
Page 15
Projection
Attention:
When used properly, the radiation from the projection of the display is not at
all dangerous!. However, avoid looking directly into the light beam and do
not aim the beam at other persons or at animals.
To display the time correctly on a wall or the ceiling, the hinged projection
element needs to be swivelled into the correct position and the room must
be appropriately darkened.
1. Press the button PROJECTION LIGHT
e
for 2 seconds.
The time projection switches itself on.
2. Adjust the projection element as desired. The time is projected onto the
required position. The projection distance is approx. 40cm - 3m.
3. Adjust the clarity of the projection with the projection focus
w
.
4. Press the button PROJECTION LIGHT
e
once again for 2 seconds to
switch the time projection off.
Background lighting for the display and projection
One-time activation of the button PROJECTION LIGHT
e
activates the display
illumination for about 8 seconds.
- 13 -