Silvercrest SSMS 600 C3 - Manual (Page 11)

8 SSMS 600 C3
GB
Assembling
WARNING! RISK OF INJURY!
► Only insert the plug into the power socket after you have assembled the
appliance for use.
NOTICE
► Before the fi rst use, clean all parts as described in the chapter “Cleaning”.
To assemble the hand blender
WARNING! RISK OF INJURY!
► The blade is extremely sharp! Handle it with great care.
■ Place the hand blender 5 on the motor unit 4 so that the arrow points to
the symbol . Turn the hand blender 5 until the arrow on the motor unit 4
points to the symbol .
Assembling the wire whisk
■ Insert the whisk 0 into the whisk holder 9.
■ Place the so assembled whisk 0 onto the motor block 4 so that the arrow
points to the symbol Turn the motor block 4 until the arrow points at the
symbol .
Assembling the liquidiser
WARNING! RISK OF INJURY!
► The blade 7 is extremely sharp! Handle it with great care.
■ Carefully place the blade 7 onto its retainer in the bowl 8.
Turn the blade 7 a little until it slides onto the holder.
NOTICE
► The blade 7 is not fi xed fi rmly in the holder. This is normal. The blade 7
is only sits fi rmly when the bowl lid 6 is put on.
■ Fill the bowl with the foodstuff s you wish to liquidise 8.
IB_102804_SSMS600C3_LB4.indb 8 IB_102804_SSMS600C3_LB4.indb 8 28.08.14 15:46 28.08.14 15:46