Switching on / off / selecting the temperature, Temperature levels, Automatic switch-off – Silvercrest SWD 100 C2 User Manual

Page 10: Cleaning and care

Advertising
background image

10 GB

Cleaning and Care / Storage / Disposal / Warranty / Service centre

Start-up / Cleaning and Care

Switching on / off /

Selecting the temperature

Switching on:

Set the control unit

1

to level 1, 2, 3, 4, 5 or 6

to switch on the heated blanket.
Note: The function display

2

will light up af-

ter switching the heated blanket on.

Switching off:

Set the control unit

1

to level 0 to switch the

heated blanket off.
Note: The function display

2

will go off.

Selecting the temperature:

Set the control unit to the highest temperature
setting (setting 6). This will cause the heating
pad to warm up quickly.

When opera-

ting the heated blanket for several
hours, we recommend setting the
control unit

1

to the lowest setting to

prevent the body from overheating
and to prevent potential subsequent
skin burns or a heat stroke.

Temperature levels

Set the control unit

1

to the desired tempera-

ture (see Fig. A).

Level 0:

off

Level 1:

minimum heat

Level 2–5: custom settings
Level 6:

maximum heat

Automatic switch-off

Note: The heated blanket switches itself off auto-
matically after approx. 180 minutes. The function
display

2

on the control unit

1

will then start

flashing.

To switch the heated blanket back on, first se-
lect level 0 and after approx. 5 sec. select the
desired temperature level.

If the heated blanket is no longer used
after the timer expires:
– switch off the heated blanket (level 0),
– unplug from the socket,
– disconnect the plug-in connector

3

, thus the

control unit

1

from the heated blanket.

Cleaning and Care

DANGER TO

LIFE BY ELECTRIC SHOCK! Before
cleaning the heated blanket, always

unplug the mains plug from the socket and dis-
connect the plug-in connector

3

, thus the con-

trol unit

1

from the heated blanket (see Fig. B).

Otherwise there is a risk of electric shock.

Use a dry, lint-free cloth for control unit

1

cleaning and care.

RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY!

Never immerse the control unit

1

in water or other liquids. It may otherwise be
damaged.

If the heated blanket is slightly soiled, use a

dampened cloth and a little liquid mild deter-
gent, if necessary.

RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY!
Never
use chemical cleaning agents or

scouring agents to clean the heated blanket
and control unit

1

. The heated blanket and

control unit

1

may otherwise be damaged.

The heated blanket is machine
washable. Set the washing machine
at an extra washing cycle for deli-

cate items at 30 °C.

Use a mild detergent at the dose recommended
by the manufacturer.

Please note, frequent washing will cause wear
on the heated blanket. It should therefore be
washed no more than a maximum of 5 times in
a washing machine during its lifetime.

Advertising