Silvercrest SIKP 2000 B2 - Manual (Page 58)

56 SIKP 2000 B2
GB
MT
Setup
So as not to overheat, the appliance requires unrestricted ventilation. Therefore,
position the appliance such that ...
there is an all-round free space of minimum 10 cm, e.g. to the nearest –
wall,
a free space directly above of minimum 60 cm, e.g. to a suspended wall
–
cabinet.
For cooling, the appliance draws in air through the openings on the underside.
Therefore, place it only on smooth surfaces, not on textiles or fl uff y surfaces, ■
such as tablecloths.
Do not place it adjacent to curtains, drapes or other textiles which, due to ■
the airfl ow, could press themselves against the appliance.
Utilisation
When you have unpacked and positioned the appliance as described above, it
is now ready for use.
Placing the cookware
Place the cookware in the middle of the cooking area ■ 1. This may ...
not project beyond the edge of the cooking area – 1...
not weigh more than 10 kg (together with the content). –
Switching on
When cookware with content is standing on the hob ■ 1:
Insert the plug – 2 into a mains power socket. A signal tone sounds and
„- L -“ appears on the display 8. The appliance is now ready for use.
Press the button On/Off
– 5. The control lamp POWER 4 lights up,
the control lamp Cooking w blinks, the symbol fl ashes below the
display 8 and „L5“ appears in the display 8. A signal tone sounds.
The appliance is now ready for use.
IB_66570_SIKP2000B2_LB5.indb Abs3:56 IB_66570_SIKP2000B2_LB5.indb Abs3:56 04.07.2011 14:00:42 Uhr 04.07.2011 14:00:42 Uhr