Silvercrest SRR 3.7 A1 - Manual (Page 13)

9 SRR 3.7 A1
GB
CAUTION – PROPERTY DAMAGE!
►
Never operate the appliance unsupervised,
and only in accordance with the information
on the nameplate.
►
Use only the supplied mains adapter (type
PTB-050100EU) to power your appliance.
►
To avoid damage caused by overheating, do
not cover the mains power adapter.
Charging the batteries
The battery should be charged for at least 90 minutes before fi rst use.
NOTE
► Ensure that the appliance is switched off before charging the
battery.
1) Plug the connection plug e into the charging socket w on the
shaver.
Ensure the +/- terminals are correctly aligned: the guide rod
in the charging socket w must be in the guide groove on the
connection plug e. Otherwise the connection plug e cannot
be plugged in.
2) Plug the mains adapter r into a mains socket that complies with
the appliance specifi cations.
The battery charge level is shown in percent (%) on the display
(battery charge level indicator q). The symbol 0 appears
on the display.
IB_102881_SRR3.7A1_LB4.indb 9 02.12.14 09:33