Silvercrest SLB 450 A2 - Manual (Page 75)

73
Handling and operation
SLB 450 A2
GB
MT
Functions
The appliance off ers three diff erent operating modes:
Continuous with low intensity ■
Continuous with high intensity ■
Massage operation ■
IMPORTANT
Risk of damage to the appliance from excessive continuous
operation.
Excessive continuous operation may cause an overheating of the pump.
The appliance switches off after 20 minutes usage time. ►
Allow the pump to cool down for 10 minutes after the normal period of use ►
before switching it back on.
Function selection on the pump
Switch the pump ♦ on with one press of the function button 3 . The LED
operation indicator 5 blinks green, and the pump is operating at the lowest
level of intensity.
By once again pressing the function button ♦ 3 the LED operation indicator 5
blinks red and the pump switches to the high intensity level.
By pressing the function button ♦ 3 once again, the appliance switches into
the programme mode. The LED operation indicator 5 blinks orange, and
the appliance is now working in the massage mode. With this, the appliance
works by alternating between the low and high intensity levels.
Press the function button ♦ 3 a fourth time to switch the appliance off .
The LED operation indicator 5 extinguishes.
NOTICE
The appliance switches off automatically after 20 minutes usage time. ►