Cleaning, After the massage – Silvercrest SSMN 2 A1 User Manual

Page 47

Advertising
background image

44

SSMN 2 A1

GB

■

Press the "On / Off " button

6. The massage heads 1 begin with the

slow massage.

■

Press the button "Massage"

5 to increase the massage speed. Press

the button "Massage"

5 once again to stop the massage heads 1.

■

Press the “Warmth” button

4, to switch the warmth on. The “Warmth”

button

4 and the massage heads 1 light up. Press the “Warmth” but-

ton

4 again to switch the warmth function off . The light on the massage

heads 1 as well as the button “Warmth” button

4 goes out.

NOTICE

►

The appliance switches off automatically after 15 minutes.

■

If you want to terminate the massage before the end of 15 minutes and wish

to switch the appliance off , press the "On/Off " button

6.

After the massage

1) Disconnect the connection plug 8 from the socket 3.

2) Remove the appliance.

3) Disconnect the mains adapter 7 from the mains power socket.

Cleaning

RISK OF ELECTRIC SHOCK

►

Before you clean the appliance, always disconnect the mains adapter 7
from the mains power socket.

►

UNDER NO CIRCUMSTANCES should you immerse the appliance in
water or other liquids during cleaning!

WARNING - PROPERTY DAMAGE!

►

Do not use any aggressive cleaning liquids or solvents. They could damage
the surface.

NOTICE

►

The zipper on the appliance must not be opened, because it is fi tted only
for production-technical reasons.

Advertising
This manual is related to the following products: