Silvercrest STMS 2017 A1 - Manual (Page 15)

Wireless keyboard with wireless mouse STMS 2017 A1 English
13
The Wristpad
If necessary, you can attach the supplied wristpad to the bottom of the keyboard.
Turn the wireless keyboard and the wristpad upside down. Preferably lay a cloth
under it to avoid any damage.
 Carefully slide one part of the first clip into the hole on the bottom of the
keyboard by applying slight pressure only (see the following figure on the
left).
 Release the pressure so that the other side of the clip clicks into the hole
(see the following figure in the middle).
 The second clip is now positioned in front of the other hole. Press the clip
of the wristpad carefully into the hole (see the following figure on the
right). The clips will release and click into the hole.
To release the wristpad, turn the wireless keyboard over with the wristpad upside
down. Preferably lay a cloth under it to avoid any damage.
 Carefully swivel the wristpad upwards (towards the bottom of the wireless
keyboard) by slightly pulling it at the same time. The clips will release
from their holes.