Silvercrest SST 50 A1 - Manual (Page 11)

9 GB
7. iPod / iPhone
The dock 1 is also suitable for an iPhone if
an appropriate dock adapter 10 is used
(number of the adapter in the table: 12 or
15). As a rule these instructions describe
the steps for operating an iPod.
7.1 Docking an iPod
CAUTION:
•
Do not exert pressure on the iPod con-
nector in the dock 1. This could dam-
age the iPod connector.
• To dock the iPod, always use a dock
adapter 10 that fits your particular
model. Either use one of the supplied
adapters or the appropriate original
iPod adapter.
• Do not remove the iPod from the
dock 1 when the iPod is switched on.
The supplied dock adapters 10 enable dif-
ferent iPod models to connect to the
dock 1. The following table indicates which
iPod models are connected with which
dock adapters 10.
iPod / iPhone models
Number on
bottom of
adapter
5G iPod with video (30GB)
9
U2 iPod with video (30GB)
iPod Classic
(80GB, 120GB)
5G iPod with video
(60GB, 80GB)
10
iPod Classic (160GB)
iPod Nano (2nd Genera-
tion) (2GB, 4GB, 8GB)
11
iPhone (4GB, 8GB, 16GB) 12
iPod Nano (3rd Generation)
(4GB, 8GB, 16GB)
13
Inserting a dock adapter
1. Look for your iPod model in the table
above.
2. The dock adapters 10 are identified by
a number on the bottom. Select the
correct dock adapter 10.
3. Remove the dust guard from the
dock 1.
4. Place the dock adapter 10 onto the
dock 1 as illustrated. Press the dock
adapter 10 on firmly from above. The
dock adapter 10 must lie flush with the
top and sides of the dock 1.
Changing the dock adapter
If you connect another iPod, you may have
to change the dock adapter 10 first.
•
Prise the dock adapter 10 carefully out
of the dock 1.
iPhone 3G (8GB, 16GB)
15
iPhone 3GS (16GB, 32GB)
iPod Touch (2nd Genera-
tion) (8GB, 16GB, 32GB)
16
iPod Touch (for 2009)
(16GB, 32GB, 64GB)
iPod Nano (4th Generation)
(8GB, 16GB)
17
iPod / iPhone models
Number on
bottom of
adapter
__DT53143_B6.book Seite 9 Dienstag, 24. August 2010 5:14 17