Silvercrest SRW 250 A1 - Manual (Page 125)

SRW 250 A1 Alarm Clock Radio
English - 123
Enabling the Alarm
After the you have set the alarm time you want, you can enable the alarm
as follows:
 Press the ALARM1 [3] or the ALARM2 [5] button quickly. The AL1
alarm sound LED [22] or the AL2 alarm sound LED [19] lights up on
the display [10]. The alarm is now enabled for the set time and with
the alarm sound.
 Press the ALARM1 [3] or the ALARM2 [5] button again quickly. The
AL1 alarm radio LED [21] or the AL2 radio [20] lights up on the
display [10]. The alarm is now enabled for the set time and with the
radio.
 To disable the alarm, press the ALARM1 [3] or the ALARM2 [5]
button again. While the alarm is disabled, the AL1 alarm sound LED
[22], the AL1 radio LED [21], the AL2 alarm sound LED [19] and the
AL2 radio LED [20] are off.
In radio alarm mode, the device powers on at the alarm
time set and receives the last frequency and frequency
band tuned in and the last volume set.