Extron electronic ISM 482 - Manual (Page 56)

4-9 Integration Scaling Matrix Switcher • Programmer’s Guide
Command/response table for SIS commands (cont’d)
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Brightness
The X2 value specified is the output to which the adjusted input is tied.
Set a specific brightness value X2 * X11 Y X2 Brt X11 Specify the brightness
adjustment.
Increment brightness value X2 +Y X2 Brt X11 Increase the brightness.
Decrement brightness value X2 –Y X2 Brt X11 Decrease the brightness.
View the brightness value X2 Y X11 Show the brightness setting.
Contrast
The
X2
value specified is the output to which the adjusted input is tied.
Set a specific contrast value X2 * X11 ^ X2 Con X11 Specify the contrast adjustment.
Increment contrast value X2 +^ X2 Con X11 Increase the contrast.
Decrement contrast value X2 –^ X2 Con X11 Decrease the contrast.
View the contrast value X2 ^ X11 Show the contrast setting.
Horizontal size
Set a specific horizontal size X2 * X12
:
X2 Hsz X12 Specify the horizontal size.
Increase the horizontal size X2 +
:
X2 Hsz X12 Widen the picture.
Decrease the horizontal size X2 –
:
X2 Hsz X12 Make the picture narrower.
View the horizontal size X2
:
X12 Show the horizontal size.
Vertical size
Set a specific vertical size X2 * X12
;
X2 Vsz X12 Specify the vertical size.
Increase the vertical size X2 +
;
X2 Vsz X12 Make the picture taller.
Decrease the vertical size X2 –
;
X2 Vsz X12 Make the picture shorter.
View the vertical size X2
;
X12 Show the vertical size.
Horizontal shift
Set a specific horizontal position X2 * X13 H X2 Hph X13 Specify the horizontal position.
Increment right X2 +H X2 Hph X13 Shift the picture right.
Decrement left X2 –H X2 Hph X13 Shift the picture left.
View the horizontal position X2 H X13 Show the horizontal position.
Vertical shift
Set a specific vertical position X2 * X13 / X2 Vph X13 Specify the vertical position.
Increment up X2 +/ X2 Vph X13 Shift the picture up.
Increment down X2 –/ X2 Vph X13 Shift the picture down.
View the vertical position X2 / X13 Show the vertical position.
Top blanking
Set a top blanking value X2 * X14 ( X2 Blt X14
Example: 1*2( 1Blt2 Blank the top two lines of the
program output.
Increment top blanking value X2 +( X2 Blt X14 Increase blanking value 1 line.
Decrement top blanking value X2 –( X2 Blt X14 Decrease blanking value 1 line.
View the top blanking value X2 ( X14