EAW KF910 - Manual (Page 2)

SPECIFICATIONS KF910
DIMENSIONAL DRAWING
INPUT PLATE
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 [email protected] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. KF910/888056(A)/2 pp 1/29/99 Printed in USA
Manufacturing tolerances are +/-0.13 and +/-1°
15.83
7.00
4.50
8.58
23.00
18.25
30º
40.00
30.00
42.00
46.00
10.81
8.58
8.75 16.75
22.00
KF910
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED
FRONT BACK
TOP
RIGHT SIDE/VIEW A-A
A
A
510497 (1)
EXP 9/4/97 SHB
The long throw high frequency module shall incorporate 5x
horn-loaded 2-in exit compression driver HF transducers. The
module shall have a nominal horizontal coverage pattern of
30°. The module’s vertical beam profile shall be adjustable via
complex digital signal processing. The module shall be inte-
grated with complementary frequency-specific modules into a
single acoustical unit via complex digital signal processing.
Module frequency response shall vary no more than ±3 dB
from 500 Hz to 14 kHz measured on axis. The module shall
produce a Sound Pressure Level (SPL) of 117 dB SPL on axis
at 1 meter with a power input of 1 Watt, and shall be capa-
ble of producing a peak output of 153 dB SPL on axis at 1
meter. Each driver shall handle 200 Watts of amplifier power
(AES Standard) and shall have a nominal impedance of 8
Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of 1/2-in thickness void-free cross-grain-
laminated Baltic birch plywood and shall employ extensive
internal bracing. It shall be finished in black catalyzed
polyurethane. Input connectors shall be one each male and
female AP6 plus two Neutrik NL4 Speakon. The enclosure shall
include sixteen 3/8”-16 threaded mounting/suspension
points (4 each top, bottom and sides). The front of the loud-
speaker shall be covered with a vinyl coated perforated steel
grille backed with open cell foam to protect against dust.
The long throw high frequency module shall be the EAW model
KF910.
470540 (A) KF910
KF910
S/N
PIN 1
PIN 1 HF D
HF D - ...
+... --
+
PIN 2
PIN 2 HF E
HF E - ...
+... --
+
C A N N O N
1
2
3
4
5
6
C A N N O N
1
2
3
4
5
6
PIN 1
PIN 2 HF A
HF A ...
... --
+
PIN 5
PIN 6 HF C
HF C ...
... --
+
PIN 3
PIN 4 HF B
HF B ...
... --
+
N E U T R I K
NL 4 MPR
N E U T R I K N E U T R I K
NL 4 MPR
N E U T R I K
AP6-FEMALE AP6-MALE