Silvercrest SURB 520 A1 User Manual
Page 20
Advertising
Power Bank SUPB 520 A1
English - 19
Charging a USB Device
Fig.: Power Bank back panel
A
Connect the USB cable of the device you wish to charge here.
B
Slide the switch to the “ON” position
C Press this button briefly to start the charging process. The charging level of the Power
Bank will be indicated for a few seconds. To display the charging level again for a few
seconds, press the button again. Press and hold this button for a few seconds to cancel the
charging process.
Note: To check the charging level of the connected USB device, please monitor the
USB device charging indicator.
Advertising